Products > Flight Instruments > 4000 Series Technical Specifications
Flytec 4000 Series Technical Specifications
Flytec 4005(4010, 4020XL, 4030XL& 4030Race specifications listed below)
AltimeterAltitude 1Absolute altitude up to 30,000 feet (9,000 m). Zero adjustment within weather dependent tolerances. Resolution 3 feet (1m) over the entire range of measurement. Display in feet or meters (user selectable).
Altitude 2Relative altitude or absolute up to 30,000 feet (9,000 m). Push button zero adjustment possible up to 17,000 feet by pressing a key to display gain or loss in altitude immediately. Resolution 3 feet (1 m) over the entire range of measurement. Display in feet or meters (user selectable).
Barometric PressureBarometric pressure input: reduced air pressure input at sea level in inches Hg or hPa. Altimeter adjustment via barometric pressure input. Range of adjustment: 950 mbar- 1060 mbar. Altimeters can be calibrated by the user.
VariometerAnalog displayFlytec's patented and well laid out multi-display with separately colored lift and sink scale and , continuous twin pass is exceptionally legible. Display range: ± 1,600 ft/min (±8 m/s) with a continuous fine resolution of 40 ft/min. (0.2 m/s). Variometer response rate is user selectable (three settings).
Digital displayDisplay range: ±2000 ft/min (10m/s). Resolution: 20ft/min. (0.1m/s) Averager: Seven selectable average value calculations over 1, 5, 10, 15, 20, 25, 30, or 35 seconds (4 updates per second)
AcousticsTwin-tone acoustics with ASI. The point at which the tone will sound is user selectable. The instrument is fitted with an optional on/off ascent and descent acoustic system with two volume levels. Rise acoustics: ascent-dependent interval with increasingly higher frequency and scale dependent pitch (in 1 m increments). Descent acoustics: descent tone/descent alarm can be switched on and off separately. Descent tone to descent alarm with adjustable response points between -40ft/min and -1600 ft/min in 40ft/min steps(-0.2 m/s and -8m/s in 0.2 m steps). Descent tone is a continuous tone with an increasingly lower frequency.
Speed measurementDigital speed displayTrue airspeed in the separate display window of the instrument when a vane-wheel sensor (optional) is connected. Display: kph, mph, or knots (user selectable). Adjustable stall alarm from 6-74 mph. Various vane-wheel sensors are available as accessories.
Vane-wheel sensor (optional)Vane-wheel sensorFor ultra-precise airspeed or windspeed measurement with vane-wheel running in sapphire bearings. Light alloy vane-wheel: 16 mm diameter. Display range: 0 - 74 mph. Sensitivity: from 1 mph. Bearings: Sapphire pivot bearings
Temperature displayAmbient temperatureCan be displayed either continuously or alternating with the real time clock or the speed display. The temperature display can be activated using the OPTION mode. Integrated temperature sensor. Display in Fahrenheit or Celsius (user selectable). Range of measurement: -22°F to 158°F (-30°C to +70°C)
Time functionsReal-Time ClockHours, minutes, day ,month, and year (Y2K compliant). Date stamp on recorded flights.
StopwatchDisplay up to 9 hours, 59 minutes, and 59 seconds. Can be operated at any time by pressing the start-stop-reset function key.
Flight Time ClockDisplay of real flying time. May be displayed during flight or for any recorded flight in MEMO mode.
Flight MemoryFlight data of the 20 most recent flights is automatically recorded. Automatic memory administration (oldest data always released for the most recent recordings).The following peak values are automatically recorded: maximum altitude 1, maximum altitude 2, maximum vario ascent value, maximum vario descent value, flight duration and the date of the flight
Option ModeThe addition of the OPTION mode to Flytec's tried and trusted user philosophy means that you now have three operating modes at your disposal: RUN mode (normal operating), SET mode (function adjustment), and OPTION mode (Individual instrument programming). The latter offers you the ability to configure your FLYTEC instrument to your own preferences. The functionality that can be determined in the option mode: vario zero point, vario sensitivity, vario dampening, averaging interval for digital vario display, measurement unit for digital vario display (ft/min or m/sec), ALT 1 in ft. or m, barometric pressure display in inHg or hPa, altimeter calibration, ALT 2 absolute or relative, ALT 2 in ft or m, stall alarm threshold, airspeed correction, airspeed units of measure(mph, kph or knots), turn on-off time display or temperature display, temperature display units of measure( °F or °C).
Power SupplyLow current consumption with two 1.5 volt alkaline batteries (approximately 150 hours). Rechargeable batteries can also be used. Remaining battery power is displayed during power-up (automatic low battery warning). No expensive lithium cells, similar to those used in solar instruments, are used to maintain real-time clock or retain flight memory data! Data is stored for up to 10 years without batteries!
OperationFlytec's operating concept is based upon a simple, well laid out key allocation. All keys are clearly and legibly marked for all functions. Adjustments can be carried out according to a uniform, three step operating concept. All keys can be operated while wearing gloves and have a perceptible tactile feel.
HousingExclusive, aerodynamic casing with the following dimensions: 5-1/2" x 3-1/4" x 1-1/2" (142 x 83 x 38 mm). Weight with two batteries and clip attachment approximately 8 oz. (240 grams).
Additional featuresAltimeter linearised for altitude recording to ICAO standard. Excellent HF shielding.
Mounting / Attachment / Special AccessoriesVarious exceptionally well designed, aerodynamically shaped, crash-resistant universal mountings can be attached to the instrument:
WarranteeTwo year parts and labor. Next day turnaround on repairs. 800 number technical support and service.
Included
Flytec 4010Includes all the features of the 4005 plus the following:
Data portFour pin ultra-mini DIN interface port for connection to a PC or a computer printer (Epson FX-80, IBM Pro printer, HP Deskjet). Flight log may be downloaded to a PC via data port, PC cable and FlyChart software (included). The flight log may also be printed directly to one of the above printers.
Pilot NameThe pilot's name may be entered into the instrument via the instrument keypad or through FlyChart software. Pilot name will appear on printed and downloaded flight logs.
Compatible with FlyChart 4.32 for WindowsFlyChart 4.32 for Windows is a PC program developed by FLYTEC, which allows 4010 users to download, save, manage, annotate and statistically analyze the stored flights and their respective data. FlyChart 4.32 also has an upload function which allows you to configure the instrument to your requirements on a PC. Minimum requirement: a PC running Windows 3.X or Windows 95.
Included
Flytec 4020 XLIncludes all the features of the 4010 plus the following:
FAI Approved BarographIn addition to the 20 flight memory of the 4010 Realtime the 4020XL professional has an integrated FAI approved barograph. Barograph recording can be switched on/off at any time with the separate REC switch. In addition to recording the user specified parameters (listed below) the 4020XL also records the time and date for the start of the flight, landing time and printout time. Any number of time markers may be set during the flight and will be displayed on the barograph printout.
Recording accuracyaltitude: 3 feet (1 meter), temperature: 1°F (1°C), speed: 1 mph (1 kph), vario: 20 ft/min (0.10 m/s)
Recording interval1, 5, 15 seconds.
Recording parametersAbsolute altitude, absolute altitude with temperature, absolute altitude with speed, vario and airspeed (polar recording).
Total memory capacityover 126 hours at 15 second recording (additional memory available).
Direct printout of barographRecorded barograph traces may be downloaded to PC using FlyChart or printed out directly to a computer printer. There are 3 automatic altitude scales and 2 user selectable printout widths. Printer models supported EPSON FX-80, IBM Proprinter,HP Deskjet.
User Customizable AudioThe 4020XL features unprecedented control over the vario audio allowing the pilot to configure the 4020XL to maximize their climbing performance according to the type of conditions they are flying in.
Audio Switch of pointIn addition to being able to select the threshold at which the vario audio starts beeping the user can define a distinct threshold (independent of the switch on threshold) at which the vario stops beeping. This value can be set between 0 ft/min and 80 ft/min in 4 ft/min increments. Beep length: The vario beep duration may be set to the users liking (3 settings) and is selectable with or without ASI (automatic scale indication).
Vario audio excitement rangeAs greater lift is encountered the pitch of the vario audio increases. The range over which this pitch increase is spread is user selectable (4 ranges).
Vario audio excitement rateAs greater lift is encountered the pitch of the vario audio increases. The rate that the pitch increase is user selectable (linear and progressive)
FlyChart 4.32 for Windows (included)FlyChart 4.32 for Windows is a PC program developed by Flytec, which allows 4020XL users to download, save, manage, annotate,and statistically analyze the stored flights and their associated barographs. FlyChart 4.32 also has an upload function which allows you to configure the instrument to your requirements on a PC. Minimum requirement: a PC running Windows 95 or higher.
Included
Flytec 4030 XLIncludes all the features of the 4020XL plus the following:
GPS InterfaceWhen connected to a GPS via the NMEA interface (e.g., Garmin GPS 12, 12 Map, GPS III+, eMap, eTrex series, etc.) the 4030XL will offer the following functions: Glide ratio display, Optimized speed-to-fly display, Final Glide Computer.
Glide Ratio Display (actual)When the pilot leaves a thermal, the instrument instantly and automatically switches to glide mode and displays actual glide ratio over the ground. Glide ratio display range up to 199:1.
Speed-to-Fly DisplayIn addition to providing actual glide ratio information the 4030XL automatically displays speed-to-fly information. No input or contact by the pilot is required. In the glide mode the 4030XL will display the next expected thermal based on the the current airspeed. Rather than fumbling with the instrument to change the value for the next expected thermal the pilot merely adjusts the airspeed so the indicator points to the revised next expected thermal. No contact with the instrument is required allowing the pilot to focus on more important tasks. The pilot may configure the 4030XL in the option mode according to his/her philosophy on thermal drift with the wind (0-100%).
Final Glide computerGlide Angle to goal: When the final glide computer is activated (by depressing one key) the 4030XL will display, in addition to your actual glide ratio over the ground, your current glide angle to goal. The glide angle to goal is shown with a up or down arrow to let you know if you are above or below glide slope.
Last Thermal IntegratorAs the pilot climbs, in what will be the last thermal approaching goal, the 4030XL will alert the pilot the moment that goal is within reach. The 4030XL will not signal to leave for goal, however, until the pilot climbs to the optimum altitude.
Final Glide to GoaWhen the signal is given and the pilot leaves for goal the 4030XL will instantly and automatically switch to final glide mode and will indicate the correct speed to fly on final glide as well as the continually updated arrival altitude above or below goal target altitude. If conditions deteriorate on the final glide and goal is no longer within reach the 4030XL will instantly and automatically revert to the last thermal integrator the moment lift is encountered. The final glide head or tail wind component can easily be entered into the 4030XL during the flight as the pilot assesses conditions near goal.
Performance polarsThe barograph function of the 4030XL can be used to generate a performance polar for the pilots particular flight configuration - this will take into consideration the effects of the glider, harness, pilot weight, instrument placement, etc. When flying according to speed-to-fly theory it is very important for a pilot to generate his/her own performance polar and not rely on overly optimistic data from a glider manufacturer or the erroneous data from well meaning pilots flying the same or "similar" glider.
FlyChart 4.32 Professional for Windows (included)In addition to all the features of FlyChart standard the professional version, when used in conjunction with a 4030XL Access,will allow the user to import/ export data, build, manipulate, download and upload performance polars and advanced control over instrument configuration. Minimum requirement: a PC running Windows 95 or higher.
Included
|
